Skip to main content

Heavy Duty Double Universal Joints

Our Heavy-Duty Double Universal Joints deliver minimal play, accurate positioning and flexibility under high operating angles. With a maximum combined working angle of 90° (45° per joint), they provide uniform speed-ratio between driving and driven shafts (with parallel output shafts). The standard material for heavy-duty double joints is high-grade alloy steel. They are also available in stainless steel and a variety of other materials and finishes.

  • Outside Diameter: 0.37"-4.00" [9,4mm-100mm]
  • Operating Torque: 18-19,800 Lb-In [2-2,237 N-m]
  • Breaking Torque: 90-99,000 Lb-In [10-11,186 N-m]
  • Operating Speed: up to 1000 RPM (depending on lubrication)
  • Operating Angle: up to 90° (45° per joint); special designs with higher angles may also be available
  • Material for Yokes: alloy steel, hardened, precision honed & ground
  • Material for Pins & Blocks: alloy steel, hardened and precision ground
  • Boot grooves are standard (parts without grooves available upon request)
  • Regular re-lubrication required, or joint can be fitted with grease packed boots
  • Bores and Keyways optional
  • Hub ends available with several standard bore configurations (Plain bore, Keyway, Hex-/Square bore)
  • Optionally available plating: Zink, Nickel, Cadmium, MoS2, Black Oxide
Heavy-Duty Double Universal Joint

Heavy-Duty Double Universal Joint

Heavy-Duty Double Universal Joint - Exploded View

Heavy-Duty Double Universal Joint - Exploded View